I want monitor the change of impedance for a coil.the exciting signal is harmonic voltage.how can I get the value of resistor and inductance of coil by the harmonic current and voltage.could you please tell me the detail operation with LABVIEW fuction modul? thanks.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
how to calculate the impedance(R,L) of a coil with LABVIEW?
- Thread starter kufe2001
- Start date
kufe2001- you asked two questions: THe first one I can answer partly but not the second, I don'r have experience with LabView. The first question relating harmonic impedance: You can run simply tests, a dc step test on a coil and determine it's dc resistance. Using that as a base, you can work out the ac resistances, using a formula. THese kind of formulas can be found from theory on cables and transmission lines. I hope that will shed some light.
Driven
Driven
jbartos
Electrical
- Jan 15, 2000
- 6,440
- 0
- 0
Suggestions:
1. To monitor the coil impedance, any impedance meter will do. Some of them use a suitable bridge to measure impedance.
2. LABVIEW Tech Support or perhaps the User's Manual are meant for the detail application of LABVIEW.
3. Check for example:
etc.
1. To monitor the coil impedance, any impedance meter will do. Some of them use a suitable bridge to measure impedance.
2. LABVIEW Tech Support or perhaps the User's Manual are meant for the detail application of LABVIEW.
3. Check for example:
etc.
- Status
Similar threads
- Locked
- Question
- Locked
- Question