Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to carry over boundary conditions from 2d to 3d model in Abaqus?

Status
Not open for further replies.
optimus2007

optimus2007

Mechanical
Sep 3, 2008
29
After generating the 3d model from 2dax I want the boundary conditions (BC´s) to be carried over too.
How can I write this in the new generated (inp of the 3d-model) input-file?
 
Status
Not open for further replies.

Similar threads

M
  • Question
How to get output in abaqus?
Replies
5
Views
4K
FEA way
FEA way
A
  • Question
Symmetric boundary conditions
Replies
3
Views
1K
Ali asger
A
A
  • Question
How can I correctly model the damping behavior in ABAQUS for unidirectional composites to achieve realistic oscillations that decay over time?
Replies
6
Views
2K
FEA way
FEA way
W
  • Question
How to model print orientation effects in a 3D-printed tensile test without the AM plugin?
Replies
4
Views
1K
wahira
W
Nir_k
  • Question
Failure of symmetric boundary constraints in Abaqus
Replies
1
Views
1K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom