Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to change font in Part list table??

Status
Not open for further replies.

tinhman

Industrial
Feb 25, 2010
29
Could somebody please show me how to change font in part list table ( draft mode)?
Thanks in advance
 
Replies continue below

Recommended for you

Right click on parts list, properties, general tab.

Unless things have changed.

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
Thanks for the reply.
But it changed in the pop up window only not in my drawing.
 
It's in the Table Style settings, but you will need to have a Text Style created for whatever settings you want.

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.

Where would we be without sat-nav?
 
"Table Style setting" where can i find it??
I am using ST3. I ran into this before but now i can not find it any more.
 
Click the View tab then Styles.
In there you will see a drop-down to select the type of style you want to modify (Dimension, Table, Text, Fill etc)
If you want to create a new text style for your table this is where you do it.
Then select Table style from the drop-down and you can create a new table style or modify an existing one. You can set different text and line styles etc.
Its a bit tedious doing it this way, but in ST4 I think its all configurable in the table properties command.

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.

Where would we be without sat-nav?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor