Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to convert combined cases to unit cases

Thread starter suslu13
Start date Mar 8, 2021

Status: Not open for further replies.

Mar 8, 2021

suslu13

Mechanical

Hi all

I have some unit load cases, then with some coefficient i convert it to the combined load cases.

I apply this forces to the constant mpc points.

Is there any way to convert combined cases to a unit load cases.

If i export applied forces from mpc with using Hypermesh, will i get the correct results.

Regards