Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to create toolpath with cutter diameter compensation with UG

Status
Not open for further replies.
Moming

Moming

Mechanical
Oct 17, 2002
1
Hi guys,

I am using UG 17, quite an old version. Anyway, I used to generate toolpath with tool centre only. I am now trying to generate toolpath with tool diameter compensation. Can anyone tell me how to do it? Thanks in advance!
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Hi I had the same problem
It is possible only in planar profile, machine, cutter compensation and put last small button :)
Will be OK !!!
Regards
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Franklin M.
  • Locked
  • Question
How hard is it to move from UG to Catia?
Replies
2
Views
270
CAD2015
CAD2015
3dr
  • Question
Drafting Files with mixed units failure, NX11
Replies
3
Views
827
Toost
Toost
CAD2015
  • Question
Create Sheet and Drawing templates........................ 2
Replies
7
Views
3K
CAD2015
CAD2015
W
  • Question
how to get graphics window coordinate?
Replies
0
Views
883
wang.wei
W
A
  • Question
NX10. Assembly Navigator. Column with freeze status of component
Replies
3
Views
828
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top Bottom