how to devide face in proe

[cgelang]

hello.
Can anybody share, how to devide face in pro-e(one face, i like to become two faces) please.

Thanks.

Regards.
cgelang

 

[mjcole]

Select the Surface using Quilt Filter
Edit > Trim hit the arrow button twice to keep both sides.

If you want to do this with a solid face you need to do a Copy Paste of the Geometry or a Offset Feature at 0 distance and then split that.

Michael

 

[loughnane]

I imagine you want to do this to split the draft, for a shutoff or something.

If that's the case you are better off going backwards in your model and building it with the split face intent first instead of building a face and adding the split intent later.

Chris Loughnane - Product Design

http://www.pdnotebook.com

http://www.twitter.com/DesignNotebook