Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to model arc grid lines or elements??

Status
Not open for further replies.
timlim12

timlim12

Civil/Environmental
Aug 3, 2007
5
is it possible to model gridlines and beams/elements in circular arcs? if so, how?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
You can use cylindrical coordinate system to define such grids and elements...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Stockton2008
  • Question
How to model concrete slabs in Etabs
Replies
1
Views
2K
InnovatorX
InnovatorX
Miladm2
  • Question
Proper Method for Modeling Offset Beam Elements
Replies
0
Views
3K
Miladm2
Miladm2
Stockton2008
  • Locked
  • Question
How to define ultimate and service load combos in Etabs
Replies
1
Views
1K
Luceid
Luceid
Stockton2008
  • Locked
  • Question
How to set displacement ratio (storey drift ratio) check in Etabs
Replies
0
Views
830
Stockton2008
Stockton2008
GJoeRMK
  • Question
Modeling question in etabs, What Etabs does to a shell element to make it "ribbed" ?
Replies
0
Views
1K
GJoeRMK
GJoeRMK

Part and Inventory Search

Sponsor

Back
Top Bottom