Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to prepare Bridge Scour report

Status
Not open for further replies.

mehhsarh

Civil/Environmental
Jun 3, 2003
1
I have used Hec-Ras program for Bridge Scour and came up with scour depths. If anyone has prepared scour report I need some feed back.
 
Replies continue below

Recommended for you

A lot of the US DOTs have hyraulic and Scour reports on thier websites - standardized forms.

Most Cities and Counties will happily accpet the State format as the usual funding breakdown includes both State and Federal monies. As such there is some type of cursory review by the State and FHWA.

I recall that you can find a complete listed of State DOTs on the FHWA website -
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor