Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to support a airplne(boeing 737) for repairs

Status
Not open for further replies.

flypax

New member
Jan 2, 2011
1
for example, replacement of aft frame of cargo doorway?
replacement of sta787 lower frame in aft cargo compartment?
repair keel beam lower chord per srm53-60-12 repair 3?
what is basic principle?
 
Replies continue below

Recommended for you

If you have to ask this question, you need to hire a consultant who has done, or supervised this kind of repair before.
B.E.
 
For 737 shoring requirements, you could send a mail to boeing (RSE) for a second opinion if you are in doubt...
 
what does the boeing SRM say ? (for the specific repair you mention)

generally, do you think the plane is going to "spring" if you detach a frame ? for an unloaded plane, i personally doubt it, BUT if you're trying to realign rivet holes afterwards then even small deflections will make this difficult. i'd support the plane on jacks (4) ... just my 2c ...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor