Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to understand Cone-Up bottom in PIP 03020? 2

Status
Not open for further replies.
tmgczb

tmgczb

Structural
May 12, 2021
169
Why does not the figure match data in the table？
1732516461021.png
 
Replies continue below

Recommended for you

Sort by date Sort by votes
The slope 1 in per 10 -ft run is for linear portion ( btw point D and E) . The proposed tank bottom configuration btw Elev 0.0 and Point D is parabolic.
The elev. at pt D is 2.0 ft . Add 6 in . ( slope 1 in per 10 -ft run ) and get 2.5 ft.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

tmgczb
  • Locked
  • Question
Confusions about PIP Storage Tank Foundation Design
Replies
0
Views
2K
tmgczb
tmgczb
CHK07
  • Locked
  • Question
HOW TO CONSIDER THE STATIC HEAD IN A BRANCHED PIPE 1
Replies
12
Views
638
LittleInch
LittleInch
Sudipto Ray
  • Locked
  • Question
how to create column section surrounding by steel plate in abaqus?
Replies
0
Views
226
Sudipto Ray
Sudipto Ray
C
  • Question
If HSS Column is welded to baseplate, then how does one knows is that a moment (fixed) connection or pinned connection?
Replies
2
Views
2K
SteelTubes
SteelTubes
Barney4671
  • Locked
  • Question
Asphalt road wash out - how much is too much
Replies
2
Views
430
TerryScan
T

Part and Inventory Search

Sponsor

Back
Top Bottom