Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in

how to use fluid cavity abaqus?

Status
Not open for further replies.
Tim 1

Tim 1

Student
Jul 8, 2024
1
0
0
ID
Hello i have eye ball model and simulate, but didn't seem right. the fluid cavity not distribute force or pressure from 1 part to other part. for the model i use axisymmetric
Screenshot_2024-07-08_184630_frnasy.png
.
maybe can someone explaine about fluid cavity?
 
Status
Not open for further replies.

Similar threads

Shubham Tiwari
  • Locked
  • Question
how to perform seismic analysis in retaining wall in abaqus
Replies
4
Views
7
Shubham Tiwari
Shubham Tiwari
robertt3
  • Locked
  • Question
ABAQUS modeling: how to bend and twist a sheet into a spiral
Replies
8
Views
9
robertt3
robertt3
Duy Binh Pham
  • Locked
  • Question
How to use results from 1st simulation as initial conditions for 2nd eigenfrequency study in COMSOL 1
Replies
3
Views
11
Duy Binh Pham
Duy Binh Pham
GaoH
  • Locked
  • Question
Abaqus uses ALE to run only one audit
Replies
2
Views
8
GaoH
GaoH
Sunicetk
  • Locked
  • Question
how to solve stress concentration in Abaqus
Replies
5
Views
6
rb1957
rb1957
Back
Top