How translate WildFire files to ProE2001.

[alexasa]

I'm working on Wildfire2 but my costumer needs ProE 2001 files.

There is some possibility to do this?. I know that is impossible read newer version files on past versions softwares.

Or may be translate to standard format without lost parameters features, and then import to 2001?

 

[looslib]

Any translation to a neutral format, Pro/E .neu file, STEP or IGES, will all result in losing the parametric feature data.

Rule of thumb: never update before the last user in your supply chain.

"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[mloew]

You may wish to investigate the Associative Topology Bus.

Best regards,

Matthew Ian Loew


Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.

 

[alexasa]

Molew.

An apologize by unknow what is Associative Topologyc bus.
Can you tell me what do you mean. Or what I could to do?

 

[mloew]

alexasa,

Please learn to use the search facility on this site. The ATB topic has been covered before (notably in the thread wildfire 2.0 (thread554-94231)). You will also find information by searching Google and the PTC website.

Best regards,

Matthew Ian Loew


Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.

 

[depecheroll]

I'd suggest using Collaboration Gateway from Proficiency. It will translate your data from Wildfire 2 to PE2001 with no problem while keeping the parametric feature content.
(

http://www.proficiency.com/products/product_overview.html)