Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HP 650c plotter pen testing at every print

Status
Not open for further replies.

pipemakermike

Mechanical
Jun 28, 2002
2
Our 650c plotter has been unused for over a year. We are now using it and every print is taking longer than it should as the plotter spends quite a lot of time testing all the pens before starting to plot. It also offers the option of servicing the pens every time and we have to chose to continue before the plotting starts. Has anybody seen this before or could suggest what the problem could be. We have replaced all the ink cartridges but havent tried to clean any fo the contacts could this be the problem. Any suggestions would be helpful

Thanks

Mike
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor