Anyone heard of a hydraulic damper or any damper that is capable of decelerating small loads (30-75lbs) in about(.015") of travel. I have a high speed application where a roller on a spring loaded pivot cylces up and down. Up and down of varying strokes. .010" - .030". I need some thing to take away the impact noise when the mechanism bottoms out. I can't use a bumper because the hard stop must be precise, and the components must resist wear. i can only think of slowing the impact to reduce the noise with some sort of damper. Any help on this would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
hydraulic damper
- Thread starter mdrummond
- Start date
MikeHalloran
Mechanical
Try opposed magnets.
Mike Halloran
Pembroke Pines, FL, USA
Mike Halloran
Pembroke Pines, FL, USA
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question