Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

hydraulic fluid 1

Status
Not open for further replies.

moodyelgamal

Electrical
Apr 15, 2006
4
can i use diesel fuel as a hydraulic fluid for pressure
3bar
low pressure cylinders
 
Replies continue below

Recommended for you

Although diesel shouldn't detonate at 43.5 psi, I would caution against using it as a working fluid. You'll have storage, disposal, material compatibility and safety considerations to deal with that you wouldn't normally with another hydraulic. Also, diesel is stinky, and it's almost impossible to keep it from pervading the air around your appartus unless it's is well ventilated.
 
You're asking for headaches. Why not go with a very light turbine oil instead. I concur with eltron on the smell of diesel oil.
 

For vehicles, 10w-40 is used about as much as hydrualic fluid these days.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor