I'm trying to measure the internal temperature of hydrogen pipework using a thermocouple up to 800 Deg C. I'm aware of the difficulties involved with this gas medium but I wondered if anyone had any advice as to the gland / fitting (if they exist) that could hold the thermocouple in place. Would welding / Brazing the T/C in position prove a better solution?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hydrogen temperature measurement
- Thread starter bigmig95
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question