hysys volume flow 2

[jesselai23]

Hi,

I have a stream flowing at 400F, 1 atm. hysys gives std liquid volume flow of 615 barrel/day. So hysys calculates the 615 barrel/day base on 60F and 14.73psi, is that right? Thank you.

 

[MortenA]

There are several different types of "standard flows" defined in HYSYS - so be carefull.

The trickiest one is the one where they state the flow if all components were condensed - and this was transferred to standard conditions - where this would be condensed - beat me?

Best regards

Morten

 

[DarrenO]

Also be wary of the fact that the standard conditions used will also change depending upon what temperature unit you are using to view your case. When viewing in C or K the standard temperature used is 15C, when viewing temperature in F or R the standard temperature being used is 60F.

 

[cloa]

If you have any other HYsys questions, please be aware its best placed in the Aspentech Forum.

http://www.eng-tips.com/threadminder.cfm?pid=137