Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I want to know the best design met

Status
Not open for further replies.
lumban

lumban

Chemical
Oct 28, 2003
1
I want to know the best design method for extruder and pelletizer, the flow rate is about 10,000 tonnes/hour, the exit pellet is approximately 2.5 mm. Extruder feed is bioplastic polymer. thank u and my best regards for eng-tips.com

regards


lumban
 
Status
Not open for further replies.

Similar threads

Alinpsh
  • Question
Hello, good time I want to convert 3
Replies
3
Views
552
pierreick
pierreick
rika kose
  • Locked
  • Question
How to determine the max/min allowable working pressure
Replies
9
Views
373
rika kose
rika kose
Commercial RO Plant
  • Locked
  • Question
What Are the Best Commercial RO Plant
Replies
1
Views
119
LittleInch
LittleInch
Anujay20
  • Locked
  • Question
Process equipment design 1
Replies
2
Views
1K
shvet
shvet
Vivaldi M. Smith
  • Locked
  • Question
Good way to make Butane evaporate in the Big Butane Tank 1
Replies
11
Views
257
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top Bottom