Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I wanted to know the difference bet

Status
Not open for further replies.
Rana741

Rana741

Civil/Environmental
Nov 4, 2022
10
I wanted to know the difference between S13 and S23 and how to identify which i should use to output result of shear to model punching
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Those are shear stresses in different directuons. Check the documentation chapter about conventions. Normally, it’s SXZ and SYZ.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

abc123ali
  • Question
Difference in cohesive zone model results peak force for the same input data
Replies
5
Views
3K
FEA way
FEA way
M
Python script to obtain the Material name of each material in the Abaqus model
Replies
3
Views
4K
IRstuff
IRstuff
A
  • Question
How can I correctly model the damping behavior in ABAQUS for unidirectional composites to achieve realistic oscillations that decay over time?
Replies
6
Views
3K
FEA way
FEA way
ShiningEngineer
  • Question
How to plot the chosen element values permanent for plot export
Replies
2
Views
2K
ShiningEngineer
ShiningEngineer
Debdip
  • Locked
  • Question
how to import the geometry from autocad to Abaqus CAE2023
Replies
1
Views
267
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom