Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IAEA Safety Class vs ASME Component Class

Status
Not open for further replies.
moizpk2001

moizpk2001

Mechanical
Feb 4, 2008
14
Is there a corelation between IAEA Safety Class and ASME Component class ( NB, NC,ND).
Kindly guide me.

Moiz
 
Status
Not open for further replies.

Similar threads

M
  • Question
ASME 16.5 2020 vs 2013 wrong pipe OD
Replies
0
Views
489
minodi
M
EMANUELE GUERRINI
  • Locked
  • Question
ASME I Boiler with 15 PSI Pressure - Can I Use an ASME IV Safety Valve?
Replies
2
Views
437
The Obturator
The Obturator
Qiu123
  • Locked
  • Question
Minimum Thickness of Flange for NPD30 Class 900 in ASME B16.47-2020 2
Replies
2
Views
203
Qiu123
Qiu123
Khalid Hameed
  • Question
ASME B 31.3 and ASME B31.8
Replies
4
Views
1K
Khalid Hameed
Khalid Hameed
shiraz883
  • Locked
  • Question
ASME vs EN 13445| EN 12953 | Allowable stress for EN materials in ASME Sec II part D (Metric)
Replies
3
Views
368
XL83NL
XL83NL

Part and Inventory Search

Sponsor

Back
Top Bottom