Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IEC 60909 Method C ???

Thread starter DCarroll
Start date Jul 2, 2003

Status: Not open for further replies.

Jul 2, 2003

DCarroll

Electrical

Can anyone enlighten me as to the basis for Method C for the calculation of X/R ratios in IEC 60909.Also if you could demonstrate the application of method C in a calculation.The standard itself is quite vague: no indication is given as to how to calculate the Zc, equivalent impedance at the assumed frequency fc. Is 20 Hz the standard assumption for a 50 Hz system, and if so, why?
Any help would be greatly appreciated.

Regards,
DCarroll.