Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IEC60204-1 Different Systems in Duct.

Thread starter djpykm
Start date Mar 30, 2017

Status: Not open for further replies.

Mar 30, 2017

djpykm

Electrical

Good Morning,
I have a machine with multiple multi conductor cables, and the 2 or three air lines in the same duct. The Air lines are suitably identified from the cables.
This is 480 Volt system. This "common" duct runs alone the side of the machine. Is this allowable under EN60204? In the US, The NEC would not allow it under 300.8. Thank you for your help.
David