IEEE articles 376-392 cable trays

[powermanchief]

SECURING 40' RISER CABLES WITH KELLEM GRIPS ON SHACKLES TO A INSTALLED STEEL CABLE TRAY. SHOULD THE GRIPS BE ABOVE THE CABLE TRAY, THEN LET THE 90* LAY IN THE TRAY?

 

[BJC]

Look a page 3-26 on this.

http://www.alliedeg.com/pdf/CT_LADR.PDF

The cable over the 90 should have as little strain as possible on it. The grips should be at or below the bottom of the 90.