Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IF Steels, and Specifications

Status
Not open for further replies.
Replies continue below

Recommended for you

Sort by date Sort by votes
SAE J2329 covers low carbon sheet steels, with Grade 5 being IF, I believe. You can obtain this spec from SAE at . I will have to look further to see if there are any ASTM specs on IF steels. In the meantime, you may try the Auto-Steel Partnership website ( under the publications section-- lots of good info available, maybe some on IF (I usually recommend it for HSLA data, forming, etc.).
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Retired Gunsmith
  • Locked
  • Question
Need help welding heat treated steels
Replies
9
Views
50
mfgenggear
mfgenggear
R.G.
  • Locked
  • Question
C-Mn Steels
Replies
2
Views
11
DekDee
DekDee
MaxKortau
  • Locked
  • Question
Low-cobalt austenitic stainless steels: melting pratices
Replies
4
Views
28
EdStainless
EdStainless
dogbural
  • Locked
  • Question
HT300 casting material - normalisation and tempering
Replies
2
Views
31
MFAMET
MFAMET
Sparky4598
  • Locked
  • Question
Fatigue damage and heat treatment 1
Replies
8
Views
31
MFAMET
MFAMET
Back
Top