IGES to Parametric modelling

[sk258013]

Hi

i have imported IGES file to catia v5. the model is very far from co-ordinate axis.
i want all three planes or an axis system on model which has no link with IGES model. in case if i delete IGES model, it should not disturb my parametric model which i build with that axis system.
how can i do this?

Thanks

 

[ferdo]

Hi,

Insert a new Axis System at an coordinate point at your choice is not working ?

Regards
Fernando

https://picasaweb.google.com/102257836106335725208

- Romania

https://picasaweb.google.com/103462806772634246699/

- EU

 

[sk258013]

We can insert but don't know the coordinates of location to insert

 

[sk258013]

We can insert but don't know the coordinates of location to insert

 

[sudhakarn]

Hi,
The axis system and the planes should be available in the default position.You can bring the iges model to the origin...create the new model by extracting the surfaces ( break the link..by isolating the extracts ) and you can delete the old igs model after creating the new one.Hope it works.

 

[sk258013]

there is location defined to every component in assembly so we can't move model to origin and build parametric model

 

[sudhakarn]

Hi,
Call this igs model in the assembly.Insert new part which will ask for a new origin point,define it on this model,create the required parametric model and if required, can delete the old model.Hope it works.