Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ILLICON is a fatally flawed code that fails verification with closed-form solutions

Status
Not open for further replies.

eg1776

Geotechnical
Mar 14, 2008
8
0
0
US
thread274-434534 thread274-434534
for the N.A.I.C.M. program for new international airport in Mexico City, Dr. McNulty proved that both of the design computer programs to compute settlement by the Dutch Contractor TASANA (D-Settle) and ILLICON by Dr. G. Mesri of the University of Illinois, had catastrophic errors that produced spurious and unsound design solutions. In particular, the Mesri ILLICON code failed classic verifications with:
1. Terzaghi's closed-form solution for instantaneous loading with constant properties;
2. Hamilton Gray's (1945) closed-form solutions for instantaneous loading on a two-layer constant properties solution.
3. R. Baron's (1948) closed-form solutions for radial flow.
4. SD5 (finite difference) by Roy E. Olson of The University of Texas at Austin.

All the papers thus produced by Mesri and company are therefore utterly suspect in their entirety. For those who are interested in the finite element code that i wrote that is verified with all these solutions, see the attached pdf that describes the basis of this FE code.
 
 https://files.engineering.com/getfile.aspx?folder=0d7c9091-53c2-48fa-b083-41dcec372076&file=1982_Consolidation_with__Axisymmetric_Flow_and_Radial_Variation_of_properties17164709.pdf
Status
Not open for further replies.
Back
Top