Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ILSS Failure Indices in Abaqus

Status
Not open for further replies.
VN1981

VN1981

Aerospace
Joined
Sep 29, 2015
Messages
186
Location
IN
Hello,
Does Abaqus provide out put of Interlaminar Shear Stress Failure Index for a laminate? Where in Abaqus CAE does one provide Bond or Interlaminar Shear Stress Allowable? In Material->Elastic->Fail Stress, only in-plane allowables are requested I think!
 
Status
Not open for further replies.

Similar threads

Nir_k
  • Locked
  • Question Question
Failure of symmetric boundary constraints in Abaqus
Replies
1
Views
2K
FEA way
FEA way
I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
D
  • Question Question
(ABAQUS) Earlier Failure and Unrealistic Cracking of Reinforced High Strength Concrete Beam Under Bending Simulation
Replies
4
Views
15K
Daniel_LEE
D
jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
699
FEA way
FEA way
mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
364
mj345
mj345

Part and Inventory Search

Sponsor

Back
Top