Mar 22, 2007 #1 DrDarrell Mechanical Apr 25, 2001 22 I have some pipe assemblies that will be TIG welded. Is there a good rule of thumb for estimating the "Weld-Time" needed for each joint? Darrell
I have some pipe assemblies that will be TIG welded. Is there a good rule of thumb for estimating the "Weld-Time" needed for each joint? Darrell
Mar 22, 2007 #2 MikeHalloran Mechanical Aug 29, 2003 14,450 Not as long as the "prep time", if you're doing it right. Best way: Measure the achieved linear speed (circumference/time) for a similar weld in similar material by the person whom you'd most likely use to do your welding. Mike Halloran Pembroke Pines, FL, USA Upvote 0 Downvote
Not as long as the "prep time", if you're doing it right. Best way: Measure the achieved linear speed (circumference/time) for a similar weld in similar material by the person whom you'd most likely use to do your welding. Mike Halloran Pembroke Pines, FL, USA
