Image Quality Problem

[Mitsu50]

Is anyone having issues with the image quality slider with SW 2010 x64 sp4.0? i have it set towards the high side, and it looks good. but a lot of times if i roll back in the tree, and do some edits, the slider will fall all the way to minimum, and i have to constantly keep restoring it. My part templates are set with the slider where i want it. Thoughts? Thanks!

 

[SBaugh]

What Video driver are you using? Is it the supported version via the SW website?

That should be your first place to look. The Second thing I would try is to turn software OpenGL on and see if the issue continues. If it does continue then its probably some sort of Video card/driver issue, even if you using the certified driver.

Cheers,

Scott Baugh, CSWP
Berry Plastics
Cad Admin\Design Engineer

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"

faq731-376

 

[Mitsu50]

I actually found some posts in the SW forums. i guess its a common problem in 2010. supposedly they are working on it...
i have a correct driver yes.

 

[manxJim]

I had this issue in SP2 or SP3, but not seen it for some time, I thought it was fixed in SP4.
Maybe I have just been lucky


Jim Self
SW10 SP4.0
Dell Precision T7500
Win 7 64bit
6GB Ram
Quaddro FX 4800
dlplimited.com

 

[macduff]

I'm on a 32 bit system and on XP and it happens to me.

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 3.1
Dell 490 XP Pro SP 2
Xeon CPU 3.00 GHz 3.00 GB of RAM
nVida Quadro FX 3450 512 MB
3D Connexion-SpaceExplorer