Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Impedance Matching Problem

Status
Not open for further replies.

Alfred123

Electrical
Apr 9, 2017
1
Hi everyone, need help here. I have designed a dual-band microstrip patch antenna for LTE and WiFi applications. The antenna operate at 2.6GHz for LTE and 5.0GHz for WiFi. I have started to design this dual-band antenna by designing the 5.0GHz WiFi antenna then introduce 2 inverted U slots to generate the resonant 2.6GHz. I cannot achieve impedance matching for the 2.6GHz LTE antenna. Please help and advice.
 
Replies continue below

Recommended for you

Impedance matching is used for eliminating power loss as the signal jumps from one circuit to the next. This is usually done by constructing RLC circuits with possibly a transformer. However, I think you might be having a problem with the difference between LTE and WiFi which I would guess is in the sidebands.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor