Import label from Autocad to WF2

[gwenn]

Hi all,

I've created a product label in AutoCad and would like to import it to my WF2 assembly file. What is the best way to do this? I've tried to save it as dxf, open it in WF and read it in my sketcher, however, it somehow only brings in the graphics and ignores my text. I've tried to open as dxf and save as iges to use in my assembly and it still ignores my text and only shows the graphics.

Thank you for your help!

-gwen

 

[3dlogix]

Try to save the text in Autocad as SPLINES, then export to DXF and then into ProE. ProE can't recongnize text fonts if they are not converted to splines.

http://www.sprdesign.com

http://www.3dlogix.com