Apr 24, 2007 #1 sg20 Mechanical Mar 8, 2005 117 Can anyone tell me a way to import a Solidworks file. Thanks in advance for your help.
Apr 24, 2007 #2 aardvarkdw Mechanical May 25, 2005 542 I believe transmagic will read a .sldprt and output a .ipt but it is not a cheap program. Otherwise you can export the file from SW as a SAT or STEP. David Upvote 0 Downvote
I believe transmagic will read a .sldprt and output a .ipt but it is not a cheap program. Otherwise you can export the file from SW as a SAT or STEP. David
Apr 24, 2007 #4 matherjd Mechanical Mar 16, 2007 53 I would use STEP (*.stp) output. If you use ACIS (*.sat) make sure to click Options in SWX and set as v7. You could also try this new translator for Parasolid files from SWX. http://labs.autodesk.com/ Autodesk Inventor Certified Expert Certified SolidWorks Professional Upvote 0 Downvote
I would use STEP (*.stp) output. If you use ACIS (*.sat) make sure to click Options in SWX and set as v7. You could also try this new translator for Parasolid files from SWX. http://labs.autodesk.com/ Autodesk Inventor Certified Expert Certified SolidWorks Professional
Apr 25, 2007 #5 BOPman Mechanical Mar 1, 2007 87 Also, make sure it exports as a solid body. If not you won't be able to mate to it. Upvote 0 Downvote
Jun 21, 2007 #6 Panzer1970 Mechanical Mar 26, 2003 57 Switch to Solidworks you would be much happier Upvote 0 Downvote
