Apr 14, 2015 #1 ChihebG Petroleum Mar 3, 2015 61 Are there any calculation tool or free software that calculate the is-situ pH of multiphase flow (Oil+water+gas)?
Are there any calculation tool or free software that calculate the is-situ pH of multiphase flow (Oil+water+gas)?
Apr 14, 2015 #2 EmmanuelTop Chemical Sep 28, 2006 1,237 What do you mean by "calculate"? An online pH analyzer, or a tool that will calculate pH based on measured concentration of electrolyte species? Dejan IVANOVIC Process Engineer, MSChE Upvote 0 Downvote
What do you mean by "calculate"? An online pH analyzer, or a tool that will calculate pH based on measured concentration of electrolyte species? Dejan IVANOVIC Process Engineer, MSChE
Apr 14, 2015 Thread starter #3 ChihebG Petroleum Mar 3, 2015 61 Yes it is. I would like to assess the in-situ pH using the measured concentration of electrolyte species. Upvote 0 Downvote
Yes it is. I would like to assess the in-situ pH using the measured concentration of electrolyte species.
Apr 14, 2015 #4 bimr Civil/Environmental Feb 25, 2003 9,332 Talk to Endress Hauser: http://www.automation.com/pdf_artic...mentation_for_produced_water_applications.pdf I would expect the oil to foul the sensor over time. Upvote 0 Downvote
Talk to Endress Hauser: http://www.automation.com/pdf_artic...mentation_for_produced_water_applications.pdf I would expect the oil to foul the sensor over time.
Apr 14, 2015 #5 EdStainless Materials May 20, 2004 16,037 They use special sensors that have a purge (flush) function. But selecting ones that will not be poisoned over time is a trick. = = = = = = = = = = = = = = = = = = = = P.E. Metallurgy, Plymouth Tube Upvote 0 Downvote
They use special sensors that have a purge (flush) function. But selecting ones that will not be poisoned over time is a trick. = = = = = = = = = = = = = = = = = = = = P.E. Metallurgy, Plymouth Tube
