incorrect template specification the units of the part and template do not match

[sammcc]

I am trying to create a set of metric drawing templates in NX9.
I have taken our existing inch ones, went to edit sheet and changed the units.

I have renamed them and they open correctly,so to test them I have created a metric model.

When I try to create a new drawing I get the message

Incorrect template specification the units of the part and template do not match

Anyone help?

 

[Dave K]

You'll need to convert the drawing templates to be actual metric files, not just use metric units.

Use ug_convert_part.exe to do this.

https://allyplm.com/2016/02/2016218how-to-convert-part-units-in-nx/

-Dave

NX 9, Teamcenter 10

 

[sammcc]

thank you!

 

[Toost]

Note on the side of this:
There is nothing wrong in using mixed units model- drawing, NX handles that very nice, I.e metric models on Inch drawings or the opposite, NX does however present a message when one are creating the drawing file that the units doesn't match. - which you should be able to acknowledge and continue.


Regards,
Tomas