Monkeyboy5067
Mechanical
- Mar 7, 2024
- 1
I have a jib crane that is currently installed on a concrete floor below is what we followed for installation, the current jib crane mounting plate is 248mm x 248mm.
We want to add 11 inches of height to the beam - how do we do this? secondly we would like to get a structural engineer to review this and provide us with a stamped drawing as we would like this to be safe and done properly.
Please let me know if anyone is interested for a reasonable fee, we are located in Vancouver BC
Fundamental for the boom:
Level, extracted, vibration-free foundation plate.
Dowels according to the technical specifications of the manufacturer
with Fischer FHB dyn. shear connector
4x FHB - A dyn M16 x 125/25
Concrete thickness min. 170 mm ®
Concrete strength class min. B25 and max. B55 DIN 1045
or min. C20/25 and max. C50/60 DIN EN 206
input torque: 4.4 kNm
Vertical force: 2,3 kN
We want to add 11 inches of height to the beam - how do we do this? secondly we would like to get a structural engineer to review this and provide us with a stamped drawing as we would like this to be safe and done properly.
Please let me know if anyone is interested for a reasonable fee, we are located in Vancouver BC
Fundamental for the boom:
Level, extracted, vibration-free foundation plate.
Dowels according to the technical specifications of the manufacturer
with Fischer FHB dyn. shear connector
4x FHB - A dyn M16 x 125/25
Concrete thickness min. 170 mm ®
Concrete strength class min. B25 and max. B55 DIN 1045
or min. C20/25 and max. C50/60 DIN EN 206
input torque: 4.4 kNm
Vertical force: 2,3 kN