Indent Feature Error 1

[VectorDave]

When using the Indent Feature, in the model it works correctly. However, when creating a drawing, the Tool Outline shows instead of the intended indentation.
Please see the attached pics. This problem is intermitant

Thanks!!

Dave....

 

[Gupta65]

That can be because tool body is still there in the part. Simple hide or delete the tool body and it should not be there in the drawing. If you still feel that it's not working that way, upload the files.

Any chance if you are creating indent in sheet metal then better use form tools.

Deepak Gupta
SW2009 SP4.1
SW2007 SP5.0
MathCAD 14.0