Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Indent

Status
Not open for further replies.

cardiomed

Mechanical
Aug 20, 2010
50

Hello all,

Following my previous threads, I created a dummy(like a male die) to make a tray( with a certain thickness)using 'indent' function. Trying indent function as an ex some where else it does work, but in this specific geometry it doesnt, ..I assume it's because of sophistication of the contours.

I am attaching this -dummy- drawing for your reference, if any one has any idea or any question about the condition I really appreciate that, FYI: the extruded surface passes through the flat(larger area) surface on the top.

Thanks very much

ps. I do even have difficulties filleting the edges when I chose all 812 edges, but that's another problem.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor