Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Indentation hardness on a FEM model

Status
Not open for further replies.
victorroda

victorroda

Mechanical
Dec 1, 2009
17
Hi all

do you know if it is possible to include indentation hardness as a material propertie in Abaqus?

Thanx in advance

Víctor ^^
 
Status
Not open for further replies.

Similar threads

D
  • Question
How to model a 2-node beam element
Replies
1
Views
1K
FEA way
FEA way
Saks1235
  • Question
ABAQUS:- Problem with Concentrated AM model Vs Goldak AM model
Replies
5
Views
2K
FEA way
FEA way
Sakthiiitm
  • Locked
  • Question
Regarding section forces and stress in a model
Replies
2
Views
306
Sakthiiitm
Sakthiiitm
ruzfactor
  • Locked
  • Question
Convergence issue for a model with driver nodes
Replies
3
Views
280
FEA way
FEA way
E
  • Question
ABAQUS IS NOT RUNNING THE MODEL
Replies
3
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom