Jul 31, 2012 #1 Meck91 Mechanical Aug 26, 2009 33 0 0 CA Hi, How much wall thiniing at extrados of long radius induction bend is allowed by Z662 and ASME B31.4 or how much wall thinning allowance should i add in design wall thickness for lond radius 6D bends. Would appreciate your feedback. Thanks, Meck91
Hi, How much wall thiniing at extrados of long radius induction bend is allowed by Z662 and ASME B31.4 or how much wall thinning allowance should i add in design wall thickness for lond radius 6D bends. Would appreciate your feedback. Thanks, Meck91
Jul 31, 2012 #2 SJones Petroleum Apr 22, 2001 3,890 1 38 GB ISO 15590-1 or ASME B16.49 have formulae to answer your question. Steve Jones Materials & Corrosion Engineer http://www.linkedin.com/pub/8/83b/b04 Upvote 0 Downvote
ISO 15590-1 or ASME B16.49 have formulae to answer your question. Steve Jones Materials & Corrosion Engineer http://www.linkedin.com/pub/8/83b/b04