I am working to separate a Fluoride powder of high purity to control to take out particles of oversize. The end product will be used in the optics field; therefore it is very sensitive to potential contaminants and impurity. Most screen separators I can find in the market is made of metal frame of some stainless steel type. I am wondering how you have been dealing with this concern in your field? what's your recommendation about best products that are wearing/corrosion resistant? thanks a bunch in advance!
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Industrial Separator for High Purity Powder
- Thread starter jxh121
- Start date
Can you describe all your service and maintenance conditions because dry powders usually non-corrosive? What is physical properties of the salt?
Use translation assistance for Engineers forum
Note the rules include No Student posting
Use translation assistance for Engineers forum
Note the rules include No Student posting
ornerynorsk
Industrial
I would look to the pharmaceutical or laboratory equipment companies for any process requiring high purity.
It is better to have enough ideas for some of them to be wrong, than to be always right by having no ideas at all.
It is better to have enough ideas for some of them to be wrong, than to be always right by having no ideas at all.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question