Dec 22, 2014 #1 JBENGR Industrial Dec 22, 2014 4 Can anyone point me in the right direction in NFPA stating the requirements for purging/inerting before loading Rail Cars?
Can anyone point me in the right direction in NFPA stating the requirements for purging/inerting before loading Rail Cars?
Dec 22, 2014 Thread starter #2 JBENGR Industrial Dec 22, 2014 4 Or anything in API? Upvote 0 Downvote
Dec 22, 2014 #3 cdafd Specifier/Regulator Aug 18, 2005 2,918 What are you going to load them with? Upvote 0 Downvote
Dec 23, 2014 Thread starter #4 JBENGR Industrial Dec 22, 2014 4 Alcohols and esters. Upvote 0 Downvote
Dec 27, 2014 #5 Duwe6 Industrial Jul 27, 2010 2,189 Typically, flammable liquids aer 'blown in' using N2 at about 25 psi. Thus the typical car arrives inerted, since the offloading was sane as loading; blown with N2 [gently - and per ARR, the cars have PRV] Upvote 0 Downvote
Typically, flammable liquids aer 'blown in' using N2 at about 25 psi. Thus the typical car arrives inerted, since the offloading was sane as loading; blown with N2 [gently - and per ARR, the cars have PRV]
