Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

inner ducts 1

Status
Not open for further replies.

GOTWW

Industrial
Jan 21, 2004
271
what is the main application or purpose of using inner ducts (ducts inside of ducts)? wire pulling, isolation??
thanks
 
Replies continue below

Recommended for you

yup, both. It allows pulling different cables while minimizing risk of damage to existing cables. Most commonly used for communication cabling.
 
Suggestion: Visit
for:
1. Clifford of Vermont now has the new, plenum-rated MaxCell inner duct available
2. MaxCell provides many key advantages over traditional inner duct.
3. MaxCell can triple the capacity in a conduit. It minimizes the cost of construction of congested building cable networks and is easier to install due to fabric flexibility in difficult building cable network systems.

for:
MOF® Armored Fiber Optical Cable which replaces Inner Duct
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor