Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Inspection/Survey

Status
Not open for further replies.

Reesh14

Electrical
Aug 3, 2005
38
I am preparing for an electrical inspection/survey of an existing commercial office building? The existing electrical system is to be inspected for code compliance, deficiencies, safety hazards, etc.

Is there a good book or reference out there that anyone recommends which covers how to perform this type of inspection/survey?

Thank you!
 
Replies continue below

Recommended for you

It depends on what country you're in.

In the US you'd really need the NEC handbook and you'd need to go over a few spots in it and then any strange aspects specifically that your building has. Otherwise, get an inspection and let them tell you what they're unhappy with, if anything.

Keith Cress
Flamin Systems, Inc.-
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor