Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installation drawings in SWx 2009

Status
Not open for further replies.

waydeclark

Mechanical
Aug 5, 2014
1
My work is stuck with SWx 2009 and SmartTeam. We have an installation drawing for a mounting structure to support a space station module. The support structure has 20 components but the module has over a hundred. The problem is that SmartTeam wants to release all the unreleased subassemblies in the module when we release the installation drawing. Is there anyway to show the module in the .sldasm file as a reference-not an active part of the assembly tree?
 
Replies continue below

Recommended for you

waydeclark,

That makes sense to me. The attached module is part of the installation drawing, so it should be in released status.

Can you send out a preliminary installation drawing?

--
JHG
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor