Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Installing Ideas12 NX in Windows-7 OS 2

Status
Not open for further replies.

NEO5044

Mechanical
Dec 13, 2010
8
Hello Fellas,
got a problem here, we are moving to Windows-7 OS; I tried to install IdeasNX 12 which went smoothly, but when I tried to create an FEA model I got a FLEXlm error. I attached a snapshot that shows the pop-up windows that I had to through and the final error message which was;

"Internal security erroe: -97
FLEXlm error: The desired vendor daemon is down
Feature: DFLEXLM RL
Vendor Host: tx4r5.tz.xyz.com
License path: 7612@tx4r5.tz.xyz.com
FLEXlm errom: -97, 121"

can someone help please? would also like to know your experience installing IdeasNX 12 in Vindows-7 OS.

Thanks & Best Regards
 
Replies continue below

Recommended for you

Run the FlexNet code on a XP machine.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
 
We had many issues doing this. I do not think it is supported. Anything Orbix related we had issues with. Exporting 3d files of a step and normal Iges files would not work. We also had trouble exporting out DWG files out of master drafting. For the FEA I did not try anything when we had our Windows 7 test machine running. You need to upgrade to at least I-Deas NX5 or I-Deas NX6 I think which supports windows 7.
 
thank you all for your feedback. it seems you were able to start IDEAS and run some tests; my problem now is that I cann't even reach that point...maybe it is the server setting...?
regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor