Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Instructions for Boiler operators

Status
Not open for further replies.

4980000

Computer
May 12, 2001
8
Can anyone helpme with "Instructions for Boiler OPerators"

Thanks in Advance
 
Replies continue below

Recommended for you

What do you need, specifically? If you have personnel interested in boiler operation, I know of a company that we use to train new operators either in classroom format or by manuals.
 
To 49800000,

The ASME Boiler Codes have general guidance and recommendations:

Section VI Recommended Rules for the Care and Operation of Heating Boilers (order QX0060)

Section VII Recommended Guidelines for the Care of Power Boilers (order QX0070)

, see codes and standards.

Most governmental jurisdictions require trained and licensed Boiler Operators. Check with insurance provider.
The boiler manufacturer should have instruction manual for items specific to the boiler. In the extreme case, think of what instructions and training would be involved with a nuclear powered boiler.
 
Standard Plant Operators Manual, Second Edition, by Steve Elonka, ISBN 0-07-019296-0, 1974.

Steam-Plant Operation, Fourth Edition, by Everett B. Woodruff and Hebert B. Lammers, ISBN 0-07-071731-1, 1976.

Lots of operator level information in either of these.

rmw
 
I was just out at the AWS show in Dallas, and picked up a catalog with some books on the topic- I'll check when I get back in the office.
 
"Low Pressure Boilers", 2nd Edition, by Frederick Steingress
"High Pressure Boilers", 3rd Edition, by F. Steingress, Harold Frost, Daryl Walker
"Stationary Engineering", 3rd Edition, same 3 authors.
Pluse Boiler Operation Video series, "Boiler Operator's Workbook", etc.
All this from American Technical Publishers, Inc.
800-323-3471
This is the info I saw at the AWS show. I haven't read, seen, or used these books, just saw that they're available.
 
I've worked in and around power houses for almost 30 years, and have acquired quite an extensive library spanning the later 1800's through to recent publications, and the SAIT (Southern Alberta Institute of Technology) mentioned by GLWells really are the best. Alberta spends some of the zillions of dollars they rake-in on oil & gas for construction & industrial trades training, and arguably has the best apprenticeship training programs on the planet. (Note that I don't live or work in Alberta, and never have.)
 
Well ga It does my heart good to hear my alma mater praised so highly ^___^ We're called 'power engineers' because we *are* trained to engineer, not just to operate. Power Engineering in Canada is a laddered syllabus combining hands-on experience with schooling - most certificate exams are two or four parts, and you can't take the last exams until you've completed the required hands-on time, usually measured in years. So by the time a power engineer has achieved the covetted First Class certificate, s/he's accumulated close to twenty years of experience and schooling and *really* knows what s/he's talking about!

I'm still low on the ladder but I've done some HVAC and piping design work and am currently planning the repiping of a hydronic boiler. Fun and feels good (especially since I'm correcting someone else's mistakes ^__~ ) Every school likes to claim "oh yeah we're the best", but its really good to see those claims supported!


"Eat well, exercise regularly, die anyways."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor