Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Integral bypass valve

Status
Not open for further replies.
engmat2007

engmat2007

Mechanical
Sep 19, 2007
3
Hello,

We specified in one of our specifications that gate valves (2" to 24") in steam service shall have an external 3 valve bonnet relief/equalization system. We got a suggesting to use an external 2 bonnet relief/equalization system instead of 3. Which configuration is best?, which configuration is more commonly used in the oil & gas industry?, what do you think?.

Thanks!

engmat2007
 
Status
Not open for further replies.

Similar threads

quizzical1
  • Locked
  • Question
Vintage airplane bypass valve identification...
Replies
0
Views
59
quizzical1
quizzical1
T
  • Question
Non return valve
Replies
7
Views
2K
Snickster
Snickster
Ram55
  • Question
Pressure reducing valve testing
Replies
2
Views
2K
Ram55
Ram55
T
  • Question
Flowrate in a valve
Replies
4
Views
3K
Snickster
Snickster
I
  • Question
Control valve sizing: Xt value
Replies
5
Views
1K
im_danl
I

Part and Inventory Search

Sponsor

Back
Top Bottom