Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Interaction parameters for DME with water and hydrocarbons

Status
Not open for further replies.
mahesh009

mahesh009

Chemical
Joined
Sep 3, 2006
Messages
9
Location
US
Hi All,

I couldn't find binary interaction parameters for DME with water and other hydrocarbons in simulators such as HYSYS,PRO/II and Aspen plus.How can i get those parameters?
My process is to separate DME from mixture of hydrocarbons(c3-c9) and water. My objective is to recycle DME from the effluents of MTBE and TAME unit in the refinery process. Appreciate your help guys..
 
Sort by date Sort by votes
Plz help me out... thanks a million in advance!!!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

engr2GW
  • Question Question
3 phase separator, oil bucket front and water weir at the same height
Replies
3
Views
670
LittleInch
LittleInch
seuenergy
  • Question Question
Zone classification for sewage storage and packing system
Replies
13
Views
20K
seuenergy
seuenergy
SF6-146
  • Locked
  • Question Question
Requesting Feedback on P&ID Design for a Cold Water Supply System with Duplicated Pumps
Replies
6
Views
2K
pierreick
pierreick
Vivaldi M. Smith
  • Locked
  • Question Question
Exchanger parameters to verify Heat Tranfer Efficiency
Replies
10
Views
994
LittleInch
LittleInch
adrich91
  • Question Question
Galvanic corrosion for material choice
Replies
1
Views
488
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top