Interferance Parts

[Tofflemire]

Hi All,

We use cosmetic threads to save regen time vs. Helical Swp. This method creates another problem when it comes to assembly drawings. Two mating parts (Screws to Threaded holes in a Plate unexploded) shows up as interfering parts with the lines where the two parts meet, (pictorially wrong) lines extending into the Plate. Is there a "Config.pro" or "Drawing setup file" setting to turn this off?

Thanks for any help you can offer

Tofflemire

 

[im4cad]

Slight possibility.

im4cad
Pro Design Services, Inc.

http://www.cadproe.com/pds/home.asp