Interior Elongated Display 1

[droberto]

One of my friends wants to make a interior hollow display cladded with thin guage aluminium or light weight MDf/Plywood with the dimensions shown in the attached diagram.
Is it possible to build without any supporting post or wall in the middle. ?

I will appreciate a professional answer.

 

[Ron]

Yes...but you need to get a structural engineer involved. With those dimensions, you can get into trouble very quickly!!!

 

[bimr]

Yes, but you should talk to a professional fabricator:

http://www.graphic-al.com/aluminum-...specifications/Reynobond_FabricationGuide.pdf

See the product details on:

http://www.bamcoinc.org/